Network Analyzers

Advantest R3965A S-Parameter Test Set Click for Pic
For use with the Advantest R3765AH and R3767AH Network Analyzers to measure transmission and reflection characteristics for three port devices. Allows measurement of S-parameters without changing device connections. Frequency range: 40MHz to 8GHz. RF breakdown level: +20dBm max. Directivity: -25dB to -40dB (depending upon frequency band). Transmission magnitude: 4dB p-p typical. Reflection magnitude: 6dN p-p typical.

price: $2250 SOLD

Agilent E8364A Network Analyzer

45MHz to 50GHz. 123dB dynamic range at test port. 138dB dynamic range with direct receiver access. 104dB dynamic range at the test port at 50 GHz. <26us/point sweep speed. Options installed - 010: Time Domain Capability; 014: configurable test set that adds front panel access to the source, the receivers and couplers which provides the ability to improve measurement sensitivity for measuring low-level signals, or to add components and other peripheral instruments for a variety of measurement applications; UNL: extended power range with bias-T. The E8364A has GPIB, Ethernet, and USB connectivity. Calibrated by Agilent in March 2007.

list: $124,767

price: $75,000 SOLD

Gigatronics 8003 Scalar Network Analyzer
10 MHz to 40 GHz (frequency range is sensor dependent). System Dynamic Range: CW Measurements: 90dB; Peak Measurements: 40dB; Swept Measurements, AC Mode 90 dB, DC Mode 80dB. Inputs: three identical inputs, A, B and C, accept detected outputs from power sensors and bridges. Full color display; each channel can be assigned a different color. Includes two Marconi 6571 sensors: 10MHz to 18GHz -30dBm to +20dBm.

price: $1500 SOLD

Agilent/HP 3577A Network Analyzer

0.5Hz to 200MHz. 0.001dB, 0.005 degree, 1ps, 0.001Hz resolution. Built-in three-terminal error correction plus normalization. Magnitude, phase, polar, real, imaginary, and group delay display modes. Source amplitude range: +15dBm to -49dBm; resolution: 0.1 dB; impedance: 50 ohm.

sale: $3000

rental: $150/month

HP 3577B Network Analyzer

5Hz to 200MHz. Two channel. 0.001dB, 0.005 degree, 1ps, 0.001Hz resolution. Built-in three-terminal error correction plus normalization. Magnitude, phase, polar, real, imaginary, and group delay display modes. Direct plotter control and vector math functions. GPIB.

sale: $4000

rental: $200/month

HP 35677A S-Parameter Test Set
Reflection measurements such as return loss, reflection coefficient and impedance in 50 ohm systems, while simultaneously displaying transmission parameters. >40dB directivity, +25dB max operating level. For use with 3577A Network Analyzer. Interconnect cables not included in price (unless ordered with 3577A).

price: $1000
rental: $95/month

HP 35677B S-Parameter Test Set

100kHz to 200MHz. Test port impedance: 75 ohm. Directivity: >40dB. For use with 3577A Network Analyzer. Interconnect cables not included in price (unless ordered with 3577A).

price: $850

rental: $90/month

HP 4195A Network/Spectrum Analyzer Click for Pic
10Hz to 500MHz, 1mHz resolution. High performance analyzer with combined vector network and spectrum analysis capabilities. Audio, baseband, HF, VHF, IF analyses. Directly measures amplitude ratio, phase, group delay, and spectrum level needed for characterizing linear/non-linear analog circuits or components. High accuracy and resolution: measures amplitude ratio and phase with accuracy of ±0.05dB/±0.3dB deg and a resolution of 0.001dB/0.01 deg. User functions. Color graphics, graphics analysis, and direct copy capability. Advanced markers. Floppy disk drive. Programmable and controllable via GPIB. Has option 001: High Stability Frequency Reference.

list: $31,900
price: $7500 SOLD
rental: $900/month

HP 8502A/H26 Transmission/Reflection Test Set
Option H26: 4MHz to 2.6GHz, 50 ohms. Permits simultaneous transmission and reflection measurements when used eg with 8754A Network Analyzer.

price: $850

HP 85044A Transmission/Reflection Test Set
300kHz to 3GHz, 50 ohms. Directivity: 35dB to 1.3GHz, 30dB to 3GHz. Test port connectors: precision 7mm; other connectors: N-type.

list: $3500
price: $1100 SOLD
rental: $175/month

HP 85046A S-Parameter Test Set Click for Pic
300kHz to 3GHz. 50 ohms impedance. RF connectors: precision 7mm test port connectors; all others N-type. Provides capability to measure impedance and transmission characteristics (including s-parameters) of 2 port devices in either direction with a single connection. Test sets are controlled from 8753 and include an internal programmable step attenuator. The 85046A is for 8753 series network analyzer.

list: $7800
price: $3500
rental: $250/month

HP 85047A S-Parameter Test Set Click for Pic
Includes a frequency doubler that can be switched in to measure 3MHz to 6GHz in a single sweep or switched out to measure 300kHz to 3GHz in a single sweep. 50 ohms impedance. RF connectors: precision 7mm test port connectors; all others N-type. The 85047A must be connected to an 8753 Network Analyzer with option 006 (6GHz receiver) to be activated.

rental only: $300/month

HP 85131A Simi-Rigid Test Port Return Cable

DC to 25.6GHz. 3.5mm (f) connectors.

price: $450

HP 85131E Flexible Cable, 3.5 mm to 3.5 mm

85131E is a 96.5 cm (38 in) long1 flexible cable with a 3.5 mm female2 to PSC-3.5 mm female connector. Cable frequency range is dc to 26.5 GHz with a return loss greater or equal to 16 dB. Insertion loss is 0.35 * sqrt(f) + 0.3, where f is frequency in GHz, for the test port connector and 2.1 dB at maximum frequency for the device connector. Phase stability of semi-rigid/flexible cables is specified with a 90 degree bend using a 4 to 3 inch radius. Stability1 of the Agilent 85131E is less than 0.22 dB and phase is 0.16 * f + 0.8, where f is frequency in GHz.

list: $3298

price: $1100

HP 85132A Semi-Rigid Test Port Return Cable Set

DC to 18GHz, APC-7 connectors. Used with 8512A and 8514A (or 8513A and 8515A with adaptors)

price: $100

HP 85132B Semi-Rigid Return Cable Set

DC to 18Ghz. 24" long. APC7 connectors on both ends.

price: $150

HP 85133D Semi-Rigid Cable Set, 2.4 mm

Dc to 50GHz with a return loss of 15 dB or better. The 85133D includes two 53 cm (21 in) long semi-rigid cables composed of a 2.4 mm female to precision slotless 2.4 mm female connector and a 2.4 mm female to 2.4 mm male connector.

list: $2725

price: $850

HP 85134D Semi-Rigid Cable Set

Includes two 53 cm (21 in) long semi-rigid cables composed of a 2.4 mm female to precision slotless 3.5 mm female connector and a 2.4 mm female to precision slotless 3.5 mm male connector.

list: $2162

price: $750

HP 85134E Flexible Cable Click for Pic
The 85134E is a 97.2cm (38.25 in) long flexible cable with a 2.4mm female to PSC-3.5mm female connector. Cable frequency range is DC to 26.5GHz with a return loss of 16dB or better. Insertion loss is 0.46 * sqrt (f) + 0.3, where f is frequency in GHz, for the test port connector and 2.7dB at maximum frequency for the device connector. Phase stability of semi-rigid/flexible cables is specified with a 90 degree bend using a 4 to 3 inch radius. Stability of the 85134E is <0.22 dB and phase is 0.16*f + 0.8, where f is frequency in GHz. One cable.

list: $3298
price: $1150

HP 85135F Flexible Cable Set

The 85135F is a 62.9cm (24.75 in) long flexible cable set composed of two 2.4mm female to 7mm connectors. Cable frequency range is DC to 18GHz with a return loss of 17dB or better. Insertion loss is 0.3 * sqrt (f) + 0.2, where f is frequency in GHz, for the test port connector and 1.5dB at maximum frequency for the device connector. Phase stability of semi-rigid/flexible cables is specified with a 90 degree bend using a 4 to 3 inch radius. Stability of the Agilent 85135F is <0.12 dB and phase is 0.13*f + 0.5, where f is frequency in GHz.

list: $3056

price: $1000

HP 8711A RF Network Analyzer Click for Pic

300kHz to 1300MHz. Floppy drive (LIF/DOS). Built-in transmission/reflection test set with 40dB directivity (corrected). Synthesized 1Hz resolution source. 50ms (or faster) sweep time, and up to +16dBm output power. Has option 1C2: IBASIC compatibility, and option 1E1: 60dB attenuator.

list: $15,650 (including options)

price: $3500 SOLD

HP 8720C Network Analyzer Click for Pic
50MHz to 20GHz. Fast-sweeping built-in synthesized source. Integrated switching S-parameter test set. Frequency accuracy: 10 ppm. Maximum power: +10dBm. Minimum power: -65dBm. Power resolution: 0.05dBm. Power flatness: plus/minus 2.5dB. Power sweep range: 20dB. Receiver sensitivity (>2GHz): -93dBm. System dynamic range (>2GHz): 103dB. Test port connector: 3.5mm. Color display. GPIB. This 8720C has options 001: 1Hz Frequency Resolution; 006: Solid-State Switching Test Set; 010: Time Domain.

list: $78,520
price: $30,000 SOLD
rental: $1250/month

HP 8753B RF Network Analyzer Click for Pic
300kHz to 3GHz. Integrated 1Hz resolution synthesized source. Direct save/recall to an external disc drive. Executes complex test procedures with the test sequence function. 100dB of dynamic range. Group delay and deviation from linear phase. 0.001dB, 0.01 deg, 0.01 nanosec marker resolution. Built-in accuracy enhancement.

list: $30,300
rental: $350/month (rental only - not for sale)

HP 8753C RF Network Analyzer Click for Pic
300kHz to 6GHz. Integrated 1Hz resolution synthesized source. Direct save/recall to an external disk drive. Execute complex test procedures with the test sequence function. 100dB of dynamic range. Group delay and deviation from linear phase. 0.001dB, 0.01 deg, 0.01 nanosec marker resolution. Built-in accuracy enhancement. Swept harmonic measurements. GPIB. Has option 006: extends frequency capability from 3GHz to 6GHz.

rental only: $550/month

HP 8753D Vector Network Analyzer Click for Pic
30kHz to 6GHz (has option 006 which extends freq range from 3GHz to 6GHz). Built-in S-parameter test set for complete forward and reverse measurements. Two independent display channels for simultaneous measurement of reflection and transmission characteristics. Integrated 1Hz resolution synthesized source. Up to 110dB of dynamic range. Group delay and deviation from linear phase. Save/recall to built-in floppy drive. Built-in accuracy enhancement. Color display. Programmable/controllable via HPIB. Also has option 010: time domain capability, and option 1D5: high stability frequency reference.

list: $39,600
price: $21,000 SOLD
rental: $1950/month

HP 8756A Scalar Network Analyzer
Dual channel. 10MHz - 40GHz; dynamic range: +10dBm to -50dBm. Measures insertion loss and gain, return loss, and absolute power. Autoscale for convenient measurements. GPIB.

list: $8500
price: $2100
rental: $250/month

HP 8757A Scalar Network Analyzer
10MHz to 100GHz. 70db dynamic range. Accurate swept power measurements (dBm). Up to four independent display channels. Limit testing built-in. Save and recall setup and calibration data. Direct plotter/printer output.

price: $2300 SOLD

HP 8757C Network Analyzer Click for Pic
10MHz up to 40GHz (frequency range detector dependent). 76dB dynamic range. Accurate swept power measurements. Buffered plotter/printer output. External disk and nine internal register save/recall. Limit testing built in. AC/DC detection mode. Noise figure capability. Limit testing on channels one and two. Adaptive normalization. Max, min, bandwidth, and n dB cursor functions. SWR display mode. Non-standard sweep mode. Auxilary voltage display mode. Precision color display. Four display channels. HPIB. Has three detector inputs, plus option 001: fourth detector input.

list: $9000
price: $5700 SOLD
rental: $450/month

Stanford Research SR770 FFT Network/Spectrum Analyzer
476uHz to 100kHz, single channel. Dynamic range: 90dB. Real-time bandwidth of 100kHz. Additionally includes low distortion synthesized source allowing measurement of the transfer functions of electronic and mechanical systems. Hardcopy output to printers and plotters. 3.5" DOS compatible disk drive. GPIB and RS-232 interfaces.

price: $4300 SOLD

Wiltron 360 System Network Analyzer
Consists of: 360 Network Analyzer (unit 1 in picture), 3611A Reversing S-Parameter Test Set (unit 2 in picture), 360SS69 System Source (unit 3 in picture). Frequency range: 40MHz to 40GHz. Four S-parameter display. Color screen. MS-DOS compatible front-panel floppy drive. Time domain, group delay, and frequency domain test capabilities. Type-K connectors. Calibrated in May 2001 by Anritsu - Wiltron. Includes: interconnect cables, system disk, power cords, calibration certificates, and copy of operating manual for each unit. Does not include rack mount cabinet.

approx combined list price: $99,900
price: $34,000 SOLD

Wiltron 560A Scalar Network Analyzer
10MHz to 40GHz capability (frequency is detector dependent). Simultaneous transmission and return loss or power measurements. Detectors not included; enquire.

list: $8500
price: $1100
rental: $200/month

HOME

Most prices include calibration, manuals, and 90 day warranty.

Contact Harlan Labs for details.
Harlan Labs 7544 Trade Street. San Diego, CA 92121

(858)578-4711, (858)578-4714 fax.