Data Communications/Telecom/Data Acquisition/Logic Analyzers

Agilent N2299A Cable
For 3488A/3499A Switch/Control Mainframes. 1.5m cable. Connects DUT to any of the N2260A/61A/63A/64A/65A/66A modules. One end is DIN96 connector (module); other end has quad D25 connectors (DUT). New/unused in sealed package.

list: $351
price: $75

Agilent 44470A Ten Channel Multiplexer Module
For 3488A/3499A Switch/Control Mainframes. Provides ten channels to switch both high and low input signals to a common bus. Can switch signals up to 250V, 2A, and 60W, or 125VA per channel. Exhibits low thermal offset characteristics, making it ideal for precision low-level signal routing. Can be operated in either a BBM mode or multiple channels close mode. Can make four-wire ohm measurements by programming two Agilent 44470As to open/close in a card pair mode. A screw terminal block is provided.

list: $710
price: $200

Agilent 44472A Dual 1x4 VHF Multiplexer Click for Pic
For 3488A/3499A Switch/Control Mainframes. Offers broadband switching capability for high frequency and pulse signals. Two independent 50 Ohm character impedance bi-directional 1x4 switches are provided for DC to 300MHz signals. Very low crosstalk makes it ideal for VHF signal measurements using spectrum, network, or distortion analyzers. Also, the excellent signal integrity of the VHF module for multiplexing inputs to your GPIB oscilloscope or waveform analyzer. Each group of four channels is isolated from the other and from the chassis to prevent ground loops300MHz, 50 Ohm. Input Characteristics: Max Voltage (center-center, center-low): 250V DC, 30V; AC RMS or 42V AC peak, (Low-chassis or low-low): 42V DC Max Current (per chan.): 30mA DC, 300mA; AC RMS Thermal Offset: <15uV; Initial Closed Channel Resistance: <1 Ohm DC isolation (<40°C, 95% RH): >107Ohm. New/Unused.

list: $1035
price: $350

Agilent 44474A Digital Input/Output Module
For 3488A/3499A Switch/Control Mainframes. Provides 16 bi-directional data lines (bits) plus 4 lines used for control and handshaking. All lines are TTL compatible. The 16 data lines offer TTL compatible input and open collector output. The 16 I/O lines or bits can be addressed individually (bit-by-bit), or as two independent 8-bit ports, or as one 16-bit word; ie: one port can be used for output operation, while the other for input. Each I/O line can sink current up to 125mA from external devices. Switching up to 2A, 250V. 7 SPDT relays module. Armature latching relay. Thermal Offset: <3uV. Maximum Scan Rate: 43 chan/sec. Max Voltage: 250V. Max Current: 2A. Max Power - Per channel: 60W, 125VA. Max Power - Per module: 420W or 875VA. Initial Closed Channel. Resistance: <1 Ohm. New/Unused.

list: $710
price: $250

Cal-Av Labs 9920M Attenuator VXI Module
DC to 3GHz. 0 to 63dB (x1 to x.0007 voltage factor) in 1dB steps (about 10% voltage factor). Four channels. 50 ohms impedance. 1.4:1 VSWR max. 2.5dB max insertion loss. Single-width, C-size. Programmable, register-based.

list: $3000
price: $500

Datron 4200A Autocal AC Standard Click for Pic

10Hz to 1MHz, 0 to 1100V. 90-day performance to ±40ppm on a 6 1/2-digit scale. Has option 10: True RMS AC converter. SPECIFICATIONS

price: $2500

Fluke DSP-100 LAN Cable Meter
Certify cable and test and troubleshoot coaxial and twisted pair cable in local area network (LAN) installations. Features new measurement technology that combines test pulses with digital signal processing to provide fast, accurate results and advanced testing capabilities. Checks LAN cable performance against IEEE, ANSI, TIA, and ISO/IEC standards. Presents test options and results in a simple menu system. Presents displays and printed reports in English, German, French, Spanish, or Italian. Runs all critical tests automatically. Includes DSP-Link software, DSP-R Standard Remote, battery charger, manual, carrying case. Previous owner's asset number marked on side of meter - see picture. Click HERE for complete specifications.

price: $150 SOLD

Fluke 2620A "Hydra" Datalogger Click for Pic
21 analog input channels (max). Thermocouple types: J, K, N, E, T, R, S, B, C. Resistance to 10M ohms. DC voltage: 100mV to 150V. Max DC resolution: 1µV. AC voltage: 300mV to 150V. DC current: 4 to 20mA. Counter to 1MHz. RS-232 I/O. AC or DC operation. Includes 2620A-100 Universal Input Module.

price: $1100 SOLD
rental: $350/month

Fluke 9100A Micro-System Troubleshooter Click for Pic
Easily troubleshoots microprocessor boards. Perform BUS, ROM, and RAM testing with a few key strokes. Write test programs in a language independent of the uP under test. SPECIFICATIONS This system is New-Old-Stock/unused. Includes manual, software, probe, clock module, power cord, and external keyboard. Keyboard is used, but 9100A and everything is is New-Old-Stock: ACCESSORIES (See below for available pods)

list: approx $64,000
price: $900 SOLD

Pods for above 9100A

Fluke 9000A-1802 Interface Pod
For use with 9100A. Unused in orig box.

price: $125

Fluke 9000A-6802 Interface Pod
For use with 9100A. Unused in orig box.

price: $150

Fluke 9000A-8048 Interface Pod
For use with 9100A. Unused in orig box.

price: $200

Fluke 9000A-8080 Interface Pod
For use with 9100A. Unused in orig box.

price: $125

Fluke 9000A-8085 Interface Pod
For use with 9100A. Unused in orig box.

price: $300

Fluke 9132A Memory Interface Pod
For use with 9100A. Unused in orig box.

price: $250

Fluke 9132A-024 ROM Module
For use with 9100A. Unused in orig box.

price: $75

Fluke 9132A-028 ROM Module
For use with 9100A. Unused in orig box.

price: $75

Fluke 9132A-032 ROM Module
For use with 9100A. Unused in orig box.

price: $75

Fluke 9132A-100 ROM Module
For use with 9100A. Unused in orig box.

price: $75

Fluke 9132A-68020 Processor Support Package
For use with 9100A. Unused in orig box.

price: $125

Fluke 9132A-68030 Processor Support Package
For use with 9100A. Unused in orig box.

price: $125

Fluke 9132A-80386 Processor Support Package
For use with 9100A. Unused in orig box.

price: $125

HP E1301B 75000 Series-B VXI Data Acquisition Mainframe Click for Pic
Built-in transducer linearizations (thermocouples, RTDs, thermsitors, strain gauges). Built-in command module. Flexible configuration for up to 112 3-wire channels (336 single ended) per cardcage. Accurate, repeatable measurements. SCPI/HPIB. Accepts a variety of VXI cards (not included). Has internal DMM option installed.

list: $3988
price: $250
rental: $100/month

HP E1401A VXI System Mainframe Click for Pic
VXI C-Size high power mainframe. Powers up to 13 C-Size plug-ins. 650 watts.

price: $175

HP E1401B C-Size VXI High-Power Mainframe Click for Pic
3-Slot, C-size. High peak and dynamic currents. Ultra-reliable power supply. Easy to service while mounted in a test rack. MTTR 5 minutes for power supply or fans. Improved, uniform airflow. Mainframe shown in picture with E1406A module installed, but module sold seperately - see below.

list: $5731
price: $375

VXI Cards for above mainframes
HP E1330B Quad 8-Bit Digital Input/Output Module

1 slot, B-size. Three separate handshake lines for each port.

price: $75

HP Agilent E1339A Digital Output/Relay Driver
72 channels. Chassis ground sinks up to 200mA. 1-Slot, B-size, register based.
Digital output or dense relay driver. Open Collector outputs switch up to 32V.
Relay coil flyback protection. Limited power is available on the module

faceplate for powering external devices. An on-board jumper permits either

the +5, +12, or +24V VXI power supplies to be used for powering external

devices.

list: $1083
price: $300

HP E1367A Dual 1 x 4, 75 Ohm RF Multiplexer
1-Slot, B-size, register based. Two 1 x 4 multiplexers. p to 1.3 GHz signals

switched. BNC connector. Off-channels terminated. Tree-switched

configuration provides high isolation.

list: $1010
price: $275

E1368A Microwave Switch Module

1-slot, B-size. DC to 18GHz, three SPDT 50 ohm terminated switches; 3mm SMA

connectors.

price: $400

E1369A Microwave Switch Driver

1-slot, B-size. One 8762A (DC to 4GHz SPDT), and two 8764A (DC to 4GHz,

5-port).

price: $300

HP E1406A Command Module, C-Size
1-Slot, C-size, message-based commander. GPIB, RS-232, Slot 0, and Resource
Manager. Up to 2 MB RAM.MXIbus protocol support for high throughput.

Agilent VIC, VXI Installation Consultant-fast/easy set-up. Easy to program as

message-based instruments.

list: $2025
price: $200

HP E1411B DMM Module
DCV, ACV, 2- & 4-wire ohms, temperature. 5.5-digit low-noise integrating

A/D. 13kHz high-speed sampling A/D. Balanced differential isolated inputs.

Use the integrating A/D to make 5.5-digit, low-noise measurements, or switch

to the sampling A/D to make 14-bit readings at rates up to 13 kHz. Accepts

RTDs, thermocouples, and thermistors. C-size, 1-slot, register-based VXI

module.

list: $2151
price: $200

HP E1420A Universal Counter
200MHz, 2ns.

price: $500

HP E1463A 32-Channel, 5 Amp, Form C VXI Switch
1-Slot, C-size, register based. Nonlatching relays. Normally closed/open and

common terminals (SPDT). Space for adding varistors for greater relay

protection. Agilent QUIC easy-to-use terminal block included. Generates low

thermal offset voltage (<3µV typical).

list: $1841
price: $125

HP E1474A Six 1x4, 75 ohm RF Multiplexer
Six 1 x 4 multiplexers. Switch signals up to 1.3 GHz. SMB male connectors for

high performance. Controls the E1475A/E1473A RF expanders. Tree

switching for high isolation, low VSWR. 1-Slot, C-size, register based.

price: $225

HP E1475A Six 1x4, 75 ohm RF Multiplexer Expander
1-Slot, C-size, register based. Six 1x4 multiplexers; switch signals up to

1.3GHz. SMB male connectors for high performance. 75 ohm SMB male

connectors (same size as 50 ohm). Used with the E1472A/E1474A. Can be

externally mounted up to 8 meters away.

price: $125

HP E1482B Bus Extender Module (VXIbus-to-MXIbus)
Connects external controller to the VXI backplane via the MXIbus interface
(E1489C). The extender is also used to create multiple-mainframe systems for

either external or embedded controller applications. Provides interface for

the external MXIbus controller. Multiple VXIbus mainframes appear as a

single system. Transparent interrupts and TTL triggering. Timing and

triggering to external devices/mainframes. VXI plug and play compatible

interface.

price: $125

HP E1697A Optical Line Interface
Generates and analyses ATM cell streams contained within a SONET or SDH
framing format. It is a single-slot VXI module that provides test capability at

the physical and ATM cell layers for the E4200/E4210 Broadband Series

Test System. Cell based implementation. Operates in both cell mode and

SONET/SDH frame mode. Provides access to ATM cells via parallel data

ports in byte serial fashion. Provides physical layer measurements as well as

error generation. Internal traffic generator has 1 foreground channel and up

to 100 background channel.

price: $150

HP E2251A M-Module Carrier
Allows up to six M-Modules² to be installed in a single C-Size VXI Mainframe
slot, providing each M-Module with its own logical address and A16/A24
memory space. Each M-Module is accessed as though it is a standard VXIbus
module occupying its own VXI slot in the cardcage.

price: $850

HP E4209A Cell Protocol Processor (CPP)
Provides real-time and post-processing protocol testing features for the

Broadband Series Test System. The basic CPP assembly and system software

can perform monitoring and simulation of ATM, F4 and F5 OAM, and AAL1

protocols. Software required to provide the features described below is

provided with the CPP hardware. Further upper layer testing can be

performed using additional software packages. Can be configured with many

different Line Interfaces, at rates from 1.5 to 622 Mb/s.

price: $200

HP Z2309A Digital Output/Relay Driver Module
72 channels. Open collector. 32 volt output level.

price: $275

Tektronix 73A-308 Relay Driver
Relay/high voltage logic driver. 80 open conductor 300mA relay drivers. The

lines are organized as ten banks of eight relay drivers.

price: $200

HP E5346A High Density Probe Adaptor Click for Pic

Signal Access: 34 channels: 32 single-ended data, 2 single-ended clock. Probe Performance: 3.0pF equivalent load capacitance; Equivalent to the logic analyzer data rate the probe is attached to; Measure signals with as little as 500 mV p-p signal amplitude. Connectivity: Provides convenient, reliable connection to target through Mictor connector; Mictor connector is easy to incorporate into your design, Agilent number 1252-7431 or AMP number 2-767004-2; Can be used with support shroud. Compatible With: Logic analyzers with 40-pin cable connectors; Support shrouds available for board thickness to 0.12 inches; 38-pin Mictor footprint.

list: $1176

price: $250 New/Unused

HP 10525E ECL Logic Probe
Dynamic muti-family logic indicator. Pulse streching for narrow pulses; pulses as narrow as 5nSec may be observed. Bad level/open circuit detection. One lamp, finger-tip display. Pulse memory capability. Overload protected.

list: $300
price: $75

HP 1660A Logic Analyzer
136 state and timing channels. Flexible channel count and measurement capabilities. Timing analysis, Conventional: 250MHz all channels, 500MHz half channels; Transitional: 125MHz all channels, 250MHz half channels; Glitch: 125MHz half channels. State analysis: 100MHz in all modes. State timing memory depth: 4k/channel, 8k in half-channel mode. Min detectable glitch: 3.5/0ns to 0/3.5ns adjustable in 500ps increments. Min detectable glitch: 3.5ns. Probe input R and C: 100k ohms and ~8pF. Trigger terms, Patterns: 10; Ranges: 2; Edge and Glitch: 2; Timers: 2. Trigger sequence terms: 12 state, 10 timing. Labels: 126. Symbols: 1000. >160 uProcessor and bus interface solutions. Mouse. Floppy drive. HPIB and RS232.

list: $13,500
price: $500
rental: $95/month

HP 16702A Logic Analyzer

Five module slots; two emulation module slots. 800 x 600, 10.3" color LCD. Rear panel connections: RS-232, monitor, parallel port, LAN 10Base-T, SCSI-2 single ended, LAN 10Base2. The 16702A includes one 16750A State/Timing module: 400MHz state; 2GHz timing; 68 channels. 4M of acquisition memory. VisiTrigger technology combines new trigger functionality with a user interface that is easy and understandable. Eye Finder automatically adjusts setup and hold for the highest confidence in measurements on high-speed buses.

price: $2500 SOLD

rental: $300/month

HP 3421A Data Acquisition/Control Unit
Electronic calibration for repeatable answers. Built-in 5 1/2 digit A/D converter with 1uV sensitivity. Measures DCV, ACV, 2- and 4-wire ohms, frequency, and temperature. It also reads and writes digital information and stores analog readings. Has internal battery and latching relays that will not change state if AC line power drops out. Display indicates channels closed, digital states, and self-test conditions. With three 44462A 8-channel multiplexer/2-channel actuator assemblies. 44462A cards can be reconfigured to 9-channel multiplexer/1-channel actuator, or 10-channel multiplexer operation. 3421A has HPIL and GPIB interface.

combined list: $5100
price: $160

HP 3488A HP-IB Switch/Control Unit
DC to 26.5GHz signal switching. Matrix, multiplexer, and general purpose relays. Digital I/O control and actuation. Up to 50 channels. 40 configuration storage registers. 11 switch and control modules. GPIB. Accepts a variety of plug-in cards; contact us for more info.

list: $1895
price: $30

HP 37913A/37910A RS-232/449/422 Interface/Slave Signal Assembly Card
2 channel passive and through monitoring. 2 channel termination for monitoring or emulation. Selectable data rate (4.8, 9.6, 19.2, 48, or 64 kBits/sec). For 37900D (see above)

list: $2950
price: $600

HP 3852A Data Acquisition/Control Unit
Max channels/system differential: 1848. Max channels/system single-ended: 4620. GPIB. Accepts a variety of plug-in cards; contact us for more info.

list: $4350
price: $325

HP 5005B Signature Analyzer/Mulitmeter
Digital and analog measurements. Single-probe measurements of logic signals, voltage, and frequency. 25MHz multiple-logic family signature analysis. Full at-speed testing of digital products. Composite signatures. Signatures compared with signature memory. 50MHz/100nSec frequency counter capability. DMM functions. GPIB.

list: $18,000
price: $175
rental: $95/month

HP 69433A Relay Output/Readback Card
For use with 6940A and 6941A multiprogrammers. Unused.

price: $25

Tektronix VX4355 Multiplier VXI Module
Relay Switching Module. 24 channels. Usable in HP VXI mainframes; see above.

price: $350

Yokogawa HR2300 Hybrid Chart Recorder Click for Pic
30 Channel. 10 inch chart width, Z-fold paper. Input range 20mV to 50V DC. Accepts various thermocouple types. Chart speed 1 to 1500mm/hr. Digital printout of values and listing of parameters. Digital display of time and day and channel variables. The HR2300 features multi-color print-out.

price: $500
rental: $150/month

HOME

Most sales include calibration, manuals, and 90 day warranty.

Contact Harlan Labs for details.
Harlan Labs 7544 Trade Street. San Diego, CA 92121

(858)578-4711, (858)578-4714 fax.